Viewing and editing the default volumes – Nortel Networks NN10300-020 User Manual

Page 50

Advertising
background image

50

Using the Audio menu

2

If you have permission, and want to edit you audio profile, press
Ok.
A list of available profiles appears.

3

Select the profile you want.
A check mark appears beside the selection.

4

Press Ok to save the setting.
The new profile is saved and you return to the main menu

--End--

Viewing and editing the default volumes

Follow this procedure to change the default volume of the handset,
headset, handsfree speaker, ringer, or buzzer.

Step

Action

1

From the main menu, select Audio.

2

From the Audio Menu, use the up/down cursor keys to select
Default Volumes and press Ok.

3

You are now presented with a list of audio devices whose default
volumes may be adjusted. Use the up/down cursor keys to find
the device you wish to adjust and press Ok.

4

If you selected Handset or Handsfree, another menu opens. The
selected audio device is listed on the screen and the current
default volume setting is depicted in a bargraph display on the
screen.

5

Press the right cursor key to increase the default volume level of
the selected audio device; press the left cursor key to decrease
the default volume level of the selected audio device. Press OK
and the settings will be saved. Press cancel to exit this menu
without saving any changes made to the default volume level for
the selected audio device. Pressing reset will set the volume
level to the nominal level of 0dB and save this new setting.

6

If you selected Ringer or Buzzer, another menu opens. The
selected audio device is listed on the screen and the current
default volume setting is depicted in a bargraph display on the
screen.

7

Press the right cursor key to increase the default volume level of
the selected audio device; press the left cursor key to decrease
the default volume level of the selected audio device. Press
cancel to exit this menu without saving any changes made to
the default volume level for the selected audio device. Pressing
reset will set the volume level to the nominal level. Press OK and
the settings will be saved.

Carrier VoIP

Nortel IP Phone 2007 User Guide (CICM)

NN10300-020

02.03

Standard

7 March 2008

Copyright © 2007, 2008 Nortel Networks

.

Advertising