Nortel Networks 1120 - Manual (Page 109)

Additional call features
109
To use Enhanced Override:
Using Forced Camp-on
Use the Forced Camp-on feature to automatically ring another IP Phone
(internal or external) immediately after that IP Phone disconnects from its
current call.
You receive a busy signal after dialing a
phone number.
1. Choose one of the following:
— Press the Override key.
— Enter the Override FFC to initiate a
Forced Camp-on.
If either person on the call disconnects at
this time, you receive an overflow (fast
busy or engaged) signal.
2. Choose one of the following:
— Press the Override key again.
— Enter the Override FFC again.
The other two people on the call receive
an override tone and a conference call is
established between the three of you. If
anyone disconnects, the other two
people remain connected.
3. To terminate the call, press the
Goodbye key.
or
EnhOvr
or
EnhOvr
(Goodbye)