Nortel Networks 1120 - Manual (Page 49)

Configuring Telephone Options
49
Enabling OnHook Default Path
The OnHook Default Path option allows control whether a headset or the
Handsfree feature is used to operate your IP Phone while it is on-hook.
To enable OnHook Default Path, press the
Services key, select
Telephone Options , and select OnHook Default Path .
To enable OnHook Default Path:
Changing feature key labels
The Change feature key label option renames the label displayed next to
each feature key or restores the default labels to the keys. To rename
feature key labels, press the
Services key, select Telephone Options ,
and select Change feature key labels .
2. Choose one of the following:
— Press the Select soft key to save the
configuration and return to the
Telephone Options menu.
— Press the Cancel soft key to keep
existing configurations.
1. Press the Up/Down navigation keys to
highlight one of the following:
— Handsfree enable
— Headset enable
2. Choose one of the following:
— Press the Select soft key to save the
default path and return to the
Telephone Options menu.
— Press the Cancel soft key to keep
existing configurations.
or
Select Cancel
or
Select Cancel