Nortel Networks 1120 - Manual (Page 59)

Configuring Local Menu options
59
Using the 2. Local Diagnostics submenu
Use the Local Tools menu 2. Local Diagnostics submenu to access the
following:
• “Using 1. IP Set&DHCP Information” on page 59
• “Using 2. Network Diagnostic Tools” on page 59
• “Using 3. Ethernet Statistics” on page 59
• “Using 4. IP Network Statistics” on page 59
• “Using 5. USB Devices” on page 60
Note: Press the Return soft key to return to the Local Diagnostics
submenu at any time while working tools in the Local Diagnostics
submenu. Use the
Return key to quickly gather information and run
tests without exiting and reentering the Local Tools menu. For
example, you can check the Ethernet Statistics, then press
Return
and enter the Network Diagnostics Tools to ping an IP address.
Using 1. IP Set&DHCP Information
The Network Configuration tool is used to view reports about IP set and
DHCP operation. This tool is for administrator use only.
Using 2. Network Diagnostic Tools
The Network Diagnostic Tools menu contains tools that are used to
diagnose network problems. This menu is for administrator use only.
Using 3. Ethernet Statistics
The Ethernet Statistics tool is used to view reports about Ethernet
operation. This tool is for administrator use only.
Using 4. IP Network Statistics
The IP Networks Statistics tool is used to view reports about network
operation. This tool is for administrator use only.