Nikon WT-2 - Manual (Page 31)

24
This section describes the settings available for the
Wireless LAN option in the camera setup menu
when the WT-2 is connected.
Menu Guide
Option Description
WT-2 receives no power from camera. Select
this option to reduce drain on batteries. Off
(default)
WT-2 on; wireless communication possible. If
ftp mode is selected, transmission of images
marked with “send” icon begins immediately.
On
Wireless LAN system
Turn the WT-2 transceiver on or off.
Mode
Choose FTP for ftp mode (
5), PTP / IP for PTP / IP
mode ( 14).
Settings
Adjust wireless network settings (
25–35), ftp set-
tings ( 37–38), or PTP / IP settings ( 36).