Nikon WT-2 User Manual
Page 55
48
2
Confi rm that a connection has been established.
To check the connection from the camera, confi rm
that “Now in FTP mode” is displayed in the top
level of the wireless LAN menu. For information
on what to do if the camera shows “WIRELESS
ERROR,” “TCP / IP ERROR,“ or “FTP ERROR,” see
“Troubleshooting” (
50).
To check the status of the connection from the computer, right-click the
Default FTP site folder and select Properties from the menu that ap-
pears. Open “FTP Site” and click Current Sessions….
Uploading Pictures
This section describes how to upload pictures as they are taken. For best re-
sults, the WT-2 and wireless LAN adapter should be within a few meters with
no obstacles between them.
1
Set the Wireless LAN > Mode option in the cam-
era setup menu to FTP and select On for Wire-
less LAN > Wireless LAN system.