Nikon WT-2 - Manual (Page 9)

2
Supported Protocols
The WT-2 wireless transmitter is a wireless LAN adapter that allows the cam-
era to be controlled remotely from a computer running Nikon Capture 4 ver-
sion 4.2 or later (available separately) or photographs to be upload to an ftp
server over a wireless LAN. The WT-2 supports the following protocols:
ftp ( 5)
New photographs and photographs stored on the camera memory card can
be uploaded to an ftp server via a wireless LAN.
* Infrastructure mode only; not required in ad-hoc mode ( 27).
PTP / IP ( 14)
The camera can be controlled from a computer on the same network and pic-
tures saved directly to the computer hard disk using Nikon Capture 4 version
4.2 or later (available separately; connection via router not supported).
Wireless LAN
access point *
LOCK POWER LINK BUSY
C S CL
A/V OUT
DC IN
POWER LINK BUSY
WT-2
ftp server
* Infrastructure mode only; not required in ad-hoc mode ( 27).
An environment with a wireless LAN is required to use the WT-2. An ftp server
is required for ftp. Operation has been confi rmed on the following systems:
• ftp: Windows Server 2003, Windows 2000 Server, Windows XP Professional,
Windows 2000 Professional, Mac OS X Server, Mac OS X. Internet ftp con-
nections and ftp servers running third-party software are not supported.
• PTP / IP: Windows XP Professional, Windows XP Home Edition, Mac OS X
(version 10.3 or later).
For the latest information on supported operating systems, see the Nikon
website for your area (
1).
Wireless LAN
access point *
LOCK POWER LINK BUSY
C S CL
A/V OUT
DC IN
POWER LINK BUSY
WT-2
Computer