National Instruments NI 1450 Series - Manual (Page 35)

Chapter 3 LEDs, DIP Switches, and Connectors
NI 1450 Series Compact Vision System User Manual 3-4 ni.com
Figure 3-3 shows the location of the DIP switches on the NI 1450.
Figure 3-3. DIP Switches
SAFE MODE Switch
To boot the NI 1450 in Safe mode, move the SAFE MODE switch to the
ON position and reset the NI 1450. Use safe mode to reconfigure TCP/IP
settings and to download or update software from the development
computer.
Downloading incorrect software to the NI 1450 may cause it to hang on
reboot or become inaccessible over the network. Powering on or resetting
the NI 1450 in SAFE MODE starts the NI 1450 but does not start the
embedded LabVIEW RT engine. To resume normal operations, reboot the
NI 1450 with the SAFE MODE switch in the OFF position.
NI 1454
Compact Vision System
ON