Numark Industries CDN90 - Manual (Page 19)

CDN90
CUE/LOOP POINT STORAGE AND RECALL
To SAVE Cue and Loop points on the current CD:
• CD should still in the drawer with cue and loop points set.
• Press + .
• Cue points are stored and LCD shows "CUE STORE" for 1 second.
• If MIDI OUT goes to another CD player’s MIDI IN, the cue point is stored on the other CD player.
To RECALL Cue points on the current CD:
• Press +
• If CD player is open, it will automatically close and LCD will show "CUE FETCH" to indicate cue point loading.
• If CD is already in the player, it will stop the current function and show "CUE FETCH" to indicate cue point loading. If the
CD doesn't have cue points stored on the CD player, then the LCD will show "NO FETCH".
• All cue, loop in, and loop out points are restored along with the BPM and downbeat for immediate access to beatkeeper
functions.
To TRANSFER stored cue points from another unit:
• “No Disc” should be in the player
• The CD Player needing cue points, (Player A), should be looped via MIDI to another CD player with the cue points already
stored (Player B).
• Press + on Player A to retrieve cue points from Player B.
• Player B will flash "CUE FETCH" and send all of its cue points to Player
• Player A will then flash "CUE STORE" and store all cue points received.
Notes:
• If over 1024 CDs have cue points written, the oldest cue points are overwritten.
• If the same CD is found with other cue points, the old cue point data is replaced by the new cue point data.
- The Leader in DJ Technology
©2000 Numark Industries - 19 - http://www.numark.com