Numark Industries CDN90 - Manual (Page 9)

CDN90
BASIC OPERATIONS
Eject: Press to load or eject the disc. The drawer will automatically close to protect the tray from
accidental damage while open. NOTE: Tray will not open if the disc is in play. In order to program
the automatic close time press and hold followed by . The display will indicate
options of 30 seconds, 60 seconds, 120 seconds, and (no) for no auto close. This setting will be
remembered at power down.
Play/Stutter: Starts the music from either the first set cue point or the last point of pause. By starting
from the last pause point while the unit is paused a new cue point is set. Pressing this button
while the unit is in play restarts the unit from the last cue point, creating a “stutter” effect.
Startup speed of initial play can be adjusted by pressing followed by and then
rotating the wheel until the desired seconds of startup are shown. Pressing followed by
twice will toggle startup between 0 to the desired seconds. This setting will be remembered
at power down.
Pause: Stops the music while in play. Pressing play following this sets a new cue point. Holding down the
button while scratching or stuttering the music will stop the music at the current position, allowing
you to capture a loop in or cue point. Pause speed (BRAKING) can be adjusted, by pressing
followed by and then rotating the wheel until the desired seconds of startup are
shown. Pressing followed by twice will toggle startup from 0 to the desired
seconds. This setting will be remembered at power down.
Cue: Returns and pauses the music at the last set cue point. The cue point is the last place in which the
unit was paused and then play was pressed. Pressing a second time allows for temporary play of
this point. You can easily edit the cue point by turning the wheel. As you rotate the wheel the
music will sound. By stopping the wheel and pressing play a new point is set.
The sound during wheel rotation can be adjusted from a smooth “scratch” sound to
the tradition “stutter” sound. To alternate modes hold
followed by
. The display will indicate “SCRATCH” when the scratch sound is active. This
indication will go away when the style of cue is stutter. This setting will be
remembered at power down.
Time: switches the time modes on the display between elapsed playing time, remaining time on the track
and remaining time on the entire CD. This setting will be remembered at power down.
Single: toggles the unit to play back just one track at a time (single) or play continuously through all tracks
and then start over repeating the CD infinitely (continuous). This setting will be remembered at
power down.
Track Selection: Rotate the dial to quickly find the desired track. To advance by +10, press the knob
while rotating.
Search: Pressing the selector changes the mode of the jog wheel to a search mode. Search
will remain active while the wheel is being moved and for 8 seconds after. Moving the
wheel clockwise rapidly moves forward through the music. Counterclockwise moves
backwards through the music. There are 2 search speeds depending upon wheel
rotation speed.
- The Leader in DJ Technology
©2002 Numark Industries - 9 - http://www.numark.com