Numark Industries CDN90 - Manual (Page 6)

CDN90
Control Unit Features
1.
PLAY/STUTTER- To start the music from the
initial cue point.
2.
PAUSE- To pause the music.
3.
CUE- To move the music to the cue point and
preview the selection.
4.
WHEEL- Used for various functions such as
cueing, scratching, pitch bend, searching, and
effect control
5.
LCD DISPLAY- Indicates all the functions, as they
are occurring, with the CD.
6.
OPEN/CLOSE- Pressing will open or close the disc
tray on the transport.
7.
SNGL- To set play mode in single or continuous
play.
8.
TIME- Controls display indication of time mode.
9.
PROGRAM- Used for setting track order and
various special commands.
10. TRACK SELECT/SEARCH-
Rotation – selects tracks
Pressing while rotating – selects tracks +10
Pressing once- Puts wheel in search mode.
11. PITCH- Actives and sets pitch slider range.
12. -,+ - Works as pitch bend and controls key and
pitch functions.
13. PITCH RANGE LED- Indicates current pitch range
of the pitch slider
14. KEY- Used for various key control.
15. PITCH SLIDER- Controls the overall speed of the
music.
16. EFFECT BUTTON- Used to determine desired
effect.
17. EFFECT HOLD- Used to set effects to an alternate
position
18. LOOP IN- Used to set stutter and loop in points.
19. LOOP OUT- Used to set loop out points and
release the loop.
20. RELOOP/STUTTER- Used for repeated play
(stutter) from the loop in point, repeating a
previously set, and hot start.
21. AUTO START- Used for setting Relay, Fader, and
Automatic play start.
22. BEAT SYNC - Used for various Beatkeeping
functions.
23. MARCHING BAR GRAPH- Tracks the beats and
measure position of music in both units and
indicates when they match.
24. INTERLOCK- Links both players for beat
alignment.
- The Leader in DJ Technology
©2002 Numark Industries - 6 - http://www.numark.com