NetComm 5 Port Gigabit Switch NP3005 - Manual (Page 7)

Rev.1 - YML671 www.netcomm.com.au
NP3005 - 5 Port Gigabit Switch Page 7
Front Panel
The figure below shows the front panels of the switch.
Front panel view of the Switch
LED Indicators
Comprehensive LED indicators display the conditions of the Switch and status of the network.
The LED indicators of the Switch include Power, Link/Act, 1000Mbps and 100Mbps. The
following shows the LED indicators for the Switch along with an explanation of each indicator.
■
POWER
This indicator lights up green when the Switch is receiving power. Otherwise, it is off.
■
Link/Act
These LED indicators light up when there is a secure connection (or link) to the desired port.
The LED indicators blink when there is reception or transmission (i.e. Activity-Act) of data
occurring on a port.
■
1000Mbps
These LED indicators light up when there is a secure connection (or link) to 1000Mbps
Gigabit Ethernet device at the desired port.
■
100Mbps
These LED indicators light up when there is a secure connection (or link) to 100Mbps Fast
Ethernet device at the desired port.
When the connection (or link) is 10Mbps, both of 1000Mbps and 100Mbps LED indicators
are off.