Warning, 2-6 deleting all waypoints, 2-7 changing a waypoint’s data – NorthStar Navigation Explorer 660 User Manual

Page 25: 3 navigating to a waypoint 5-2-8 sort waypoints, 3-1 starting to navigate to a waypoint, 3-2 cancelling navigation to a waypoint

Advertising
background image

Northstar Explorer 660 Installation and Operation Manual

25

Deleting a waypoint from the waypoints
display

1

In the waypoints display, press

or

to

highlight the waypoint to delete. Press MENU
and select Delete.

2 Select

Yes to confirm.

5-2-6 Deleting all waypoints

1

In the waypoints display and press MENU
and select Delete all.

2 Select

Yes to confirm.

5-2-7 Changing a waypoint’s data

To change the waypoint data when it is displayed
in a window:

1

Select the data to change.

Press

ENTER.

Use the cursor keys to change the data.

Press

ENTER.

2

If necessary, repeat the above step to change
other data.

3 Select

Save.

5-3 Navigating to a waypoint

5-2-8 Sort Waypoints

To change how the waypoints list is displayed:

1 Press

MENU and select Sort by.

2

Select how to display the list:

Name: In alphabetical order by name.

Icon: Grouped by icon type.

Distance: In order of distance from the
boat.

An arrow at at the top of a column indicates how
the waypoints are sorted.

5-3-1 Starting to navigate to a waypoint

From the chart or highway display

1 Press

GOTO/AUTO and select Waypoint.

2

Select a waypoint from the list.

From the waypoints display

1 Press or

to highlight the waypoint to

go to.

2 Press

MENU and select Goto.

!

WARNING

Make sure the course does not pass over land
or dangerous waters.

5-3-2 Cancelling navigation to a waypoint

1 Press

ESC

until the chart display is displayed.

2 Press

GOTO/AUTO

and select Cancel

goto.

The Explorer 660 navigates to the waypoint as
described in section 3-1.

Advertising