NorthStar Navigation Explorer 660 - Manual (Page 66)

Northstar Explorer 660 Installation and Operation Manual 66
16-5 Wiring the power/data cable
1 Wire the power:
• Either Basic wiring: When the main
switch is on, the Explorer 660 must be
powered on manually with the key. The
engine hours counter and fuel counter
are disabled.
• Or Auto power wiring: The Explorer 660
turns on and off automatically when the
ignition is turned on and off. The engine
hours counter and fuel counter are
enabled. Choose auto power when the
optional fuel kit is fitted.
Note: With auto power, the Explorer 660
can not be turned off using the key.
2 Wire any external beepers or lights. If the
current is more than 200 mA, fit a relay.
3 The power/data cable has a plug with a black
collar. Plug this plug into into the connector
with a black nut on the back of the Explorer
660. Turn the collar to lock the connector.
Main
switch
Fuse 2 A
Red
Yellow
Black Main
switch
12/24 V DC
Basic wiring
Power/data
cable
Fuse 2 A
Red
Yellow
Black
Auto power wiring
Power/data
cable
Fuse 2 A
Ignition
switch
Ignition
Red
Green
Wiring external beepers or lights
Power/data
cable
External
beepers or
lights
12/24 V DC