NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 101)

700 Series Managed Switch User’s Guide for Software v2.1
Command Line Interface 6-11
SM-10004-02
Trunk Id Ports
-------- ----------------------------
1 Fa1/9,Fa1/10
2 Fa1/1,Fa1/2
3 Fa1/17,Fa1/18
4
VLAN
The show VLAN command displays VLAN configuration and status of the switch.
Brief
The show vlan brief command displays a quick summary of each VLAN configured.
Syntax
FSM726# show vlan brief
An example of the display output is shown below.
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 Netgear
active Untagged:
Fa1/4,Fa1/5,Fa1/7,Fa1/11,
Fa1/12,Fa1/13,Fa1/14,Fa1/15,
Fa1/19,Fa1/20,Fa1/21,Fa1/22,
Fa1/23
3 Company active
Tagged:
Gi1/25, Gi1/26
VLAN
The show vlan command displays information on membership of individual VLANs.
Syntax
FSM726# show vlan [cr | VLAN index #]
Where
<cr> = a carriage return. The command show vlan lists the VLANs configured on the switch.