Advanced> spanning tree > port settings, Advanced> spanning tree > port settings -34 – NETGEAR 700 Series Managed Switch for Software v2.1 User Manual
Page 84
Advertising
700 Series Managed Switch User’s Guide for Software v2.1
5-34
Web-Based Management Interface
SM-10004-02
Hello Time
Time between configuration messages sent by the Spanning Tree algorithm
Max Age
Amount of time before a configuration message is discarded by the system
Forward Delay Amount of time system spent transitioning from the ‘learning’ to the
‘listening’ to the ‘forwarding’ states
Bridge Priority Priority setting among other switches in the Spanning Tree
Disable: Disable Spanning Tree algorithm on the system.
Advanced> Spanning Tree > Port Settings
Figure 5-35: Figure 4-26. Spanning Tree: Port Settings
For the Port Settings options, you can specify Spanning Tree port priority, cost, and Fastlink
parameters for each port.
Advertising