NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 94)

700 Series Managed Switch User’s Guide for Software v2.1
6-4 Command Line Interface
SM-10004-02
FSM726# show diffserv
An example of the partial output is shown below.
DSCP Priority
==== ========
0 normal
1 normal
2 normal
3 normal
4 normal
5 normal
6 normal
Interfaces
The show interface command displays such information as port statistics, duplex, speed and
other port-related information.
Syntax
FSM726# show interface Ethernet <x/y>
Where
<x/y> = x is the stack number (always 1 in FSM726), y is the port number
An example of the display output is shown below.
FastEthernet1/23 is Up
Hardware is Fast Ethernet
Auto-duplex (Full), Auto Speed (100), 100BaseTX/FX
pvid is: 1
cos is normal
broadcast rate limit is 1488100 packets/second
input: 63994 Bytes, 489 Unicast Packets, 83 Non-unicast Packets
0 Packet Discards, 0 Packet Errors
0 Undersized Packets, 0 Oversized Packets
output: 223115 Bytes, 484 Unicast Packets, 4 Non-unicast Packets