NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 100)

700 Series Managed Switch User’s Guide for Software v2.1
6-10 Command Line Interface
SM-10004-02
System
The show system command displays system-related data.
Syntax
FSM726# show system
An example of the display output is shown below.
System Uptime: 0 Days 1 hr. 42 min. 15 sec.
System Description: FSM726 Managed Switch
System name: Switch #1
System contact: Tom
System location: Closet #2
MAC Address: 00:09:5b:36:b0:07
IP Assignment Mode: Manual
IP Address: 169.254.224.1
Network Mask: 255.255.0.0
Gateway Address: 169.254.224.5
Web Access is: Enabled
Telnet Access is: Enabled
Password is: Disabled
User Authentication Mode is Local
RADIUS Server IP Address: 0.0.0.0
Shared Secret is:
Hardware Version: RA
Boot ROM Version: 1.2 (2495)
Software Version: 1.0.4 (2505)
Next Boot from: Last Saved
TFTP Server IP Address: 0.0.0.0
TFTP Path/Filename:
IP Filtering is: Disabled
Trunking
The show trunking command displays the trunking state of the switch. The FSM726 is capable
of forming four trunks, so shown in the display are the ports that belongs to each trunk.
Syntax
FSM726# show trunking
An example of the display output is shown below.