NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 107)

700 Series Managed Switch User’s Guide for Software v2.1
Command Line Interface 6-17
SM-10004-02
Where
<interface type> = Options for this field include gbic and tp .
Shutdown
The shutdown command let you shutdown this particular interface. You can reverse this
command by using the no shutdown command.
Syntax
FSM726(config-if)# Shutdown
Spanning Tree
The spanning-tree command lets you configure the variables of the port that affects its
spanning-tree operation, items such as port cost and priority is configured through this command.
Syntax
FSM726(config-if)# spanning-tree [cost <1-65535> | port-priority <0-255> | fastlink ]
Where
Cost <1-65535> = the cost of the port, ranges from 1-65535
port-priority <0-255> = the priority of the port, ranges from 0-255
fastlink = enables Fastlink, a mode that bypasses the listening & learning phase of Spanning
Tree
Speed
Syntax
FSM726(config-if)# speed <speed>
Where
<speed> = the speed of the port. The options are 10, 100, 1000, or auto (for automatic speed
configuration).