NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 55)

700 Series Managed Switch User’s Guide for Software v2.1
Web-Based Management Interface 5-5
SM-10004-02
Status > Switch Statistics
The Switch Statistics Chart allows you to compare one type of statistic across all the ports. You
can reset the counters in the Reset Statistics page.
Figure 5-4: Switch Statistics
You can configure the following options on the Switch Statistics Chart:
• Statistics The type of system data to be monitored
• Refresh Rate The time interval between automatic refreshes (5, 10, 15, 30 seconds)
• Color The color setting for the chart
There are 24 kinds of Statistics that you can review on this screen:
• Inbound Octet Rate: Received Byte per second.
• Inbound Unicast Packet Rate: Received Unicast packet per second.
• Inbound Non-unicast Packet rate: Received Non-unicast packet per second.
• Inbound Discard Rate: Received and is discarded packet per second.
• Inbound Error Rate: Received error packet per second.
• Outbound Octet Rate: Transmitted byte per second.
• Outbound Unicast Packet Rate: Transmitted unicast packet per second.