Set-up> gbic, Set-up> gbic -15 – NETGEAR 700 Series Managed Switch for Software v2.1 User Manual
Page 65
Advertising
700 Series Managed Switch User’s Guide for Software v2.1
Web-Based Management Interface
5-15
SM-10004-02
•
Flow Control:
Indicates whether Flow Control support is set for automatic (Auto) or off
(Disabled)
Set-up> GBIC
This page allows the user to choose the port type for the gigabit ports. The default is 1000BASE-T
(RJ-45).
Figure 5-15: Setup: GBIC
If you want to use a GBIC, the setting on this page must be set accordingly. The switch
auto-detects if the media is copper or GBIC. This Auto-detect feature is enabled by default.
Note: Enabling the GBIC connector for a Gigabit Ethernet port disables the built-in 1000BASE-T
port.
Advertising