NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 69)

700 Series Managed Switch User’s Guide for Software v2.1
Web-Based Management Interface 5-19
SM-10004-02
The user name and password can be up to 20 characters and are case sensitive. The password
entered is encrypted on the screen and will display as a sequence of asterisks (*). The factory
default password is
password in lower case letters.
On this page, you can:
• Enable or disable password protection
• Change the user name and password
• Click Apply to activate the new password
Note: If you have enabled password protection without setting your own password, the default
password is
password in all lower case letters.
Advanced Options
There are 11 sub-menus in the Advanced Section.
Figure 5-21: Advanced menu
• Disable Advanced Alerting
• Advanced Security
• Port Mirroring