NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 97)

700 Series Managed Switch User’s Guide for Software v2.1
Command Line Interface 6-7
SM-10004-02
Running-Config
The show running-config command displays the current running configuration. It displays a
great deal of information, including system information, interface status of each port, VLAN
configuration, DiffServ, and SNMP configuration among other things.
Syntax
FSM726# show running-config
A partial example of the display output is shown below.
snmp-server name Not Defined
snmp-server location Wiring Closet #1
snmp-server contact Tom
!
snmp-server community public RO
snmp-server community Tom WO
snmp-server host-authorization
!
vlan database
vlan 1 Default
exit
!
interface Ethernet 1/1
cos Normal
description Not Defined
no shutdown
speed 100
duplex full
flow-ctrl
negotiation auto
switchport access vlan untagged 1
switchport access native 1
mirror--
mirror monitor
spanning-tree port-priority 128
spanning-tree cost 19
no spanning-tree fastlink
exit
interface Ethernet 1/2
cos Normal
description Not Defined