NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 99)

700 Series Managed Switch User’s Guide for Software v2.1
Command Line Interface 6-9
SM-10004-02
VLAN1
Spanning tree enabled protocol IEEE
ROOT ID Priority 32768
Address 0009.5b36.b007
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32768
Address: 0009.5b36.b007
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Port Designated
Name Prio Cost Sts Cost Bridge ID
------- ---- ---- --- ---- --------------
Fa1/1 128 19 BLK 0 0009.5b36.b007
Fa1/2 128 19 BLK 0 0009.5b36.b007
Fa1/3 128 19 BLK 0 0009.5b36.b007
Fa1/4 128 19 BLK 0 0009.5b36.b007
…
Fa1/22 128 19 BLK 0 0009.5b36.b007
Fa1/23 128 19 FWD 0 0009.5b36.b007
Fa1/24 128 19 BLK 0 0009.5b36.b007
Gi1/25 128 4 BLK 0 0009.5b36.b007
Gi1/26 128 4 BLK 0 0009.5b36.b007
Interface
The show spanning-tree interface command displays the spanning tree state of a
particular port.
Syntax
FSM726# show spanning-tree interface ethernet <x/y>
Where
<x/y> = x is the stack number (always 1 in the case with FSM726), and y is the port number.
An example of the display output is shown below:.
Interface Fa1/23 (port 23) in Spanning tree is FORWARDING
Port path cost 128, Port priority 19
Designated root has priority 32768, address 0009.5b36.b007
Designated bridge has priority 32768, address 0009.5b36.b007