New Media Technology Omnia ONE Multicast - Manual (Page 25)

Main Menu
The OmniaONE menu system has been designed to be intuitive and simple to use. Most operating parameters are
found under one of the menu headings and sub-headings, allowing adjustments to be made quickly and with ease.
Rotating the jog-wheel sequentially highlights each menu item in turn.
When the jog wheel is pressed inward (clicked) while a menu item is highlighted it will open that item’s submenu.
Similar behavior occurs when selections are made within the various submenus.
To return to the previous level, rotate the jog wheel clockwise until <-Exit is highlighted and then press the jog
wheel inward. (Click) This will return you to the next highest level in the menu structure. NOTE: Some of the
longer menus have an <-Exit option at the top of the menu as well as at the bottom.
The OmniaONE Main Menu offers five selections :
• Preset
• Processing
• Input/Output
• Administrative
• Lock Front Panel (not visible in the above screenshot)
User Interface Tutorial – Input Source Selection and Peak Level Setting
The following two exercises are a useful introduction to the user interface. Start from the Main Menu (as displayed
when the unit is first turned on).
The first exercise changes a parameter selection (the Input Source selection):
¾ Rotate the jog-wheel to highlight Input/Output.
¾ Click the jog-wheel (push on the wheel once until a click is felt and release) to bring up the Input/Output
menu.
¾ Rotate the jog-wheel to highlight Input and click.
¾ Rotate the jog-wheel to highlight Input Src and click.
OmniaONE Multicast - Use and Operation Manual – Version 0.90
25