New Media Technology Omnia ONE Multicast User Manual
Page 50
Digital Audio Input: Configuration: Two-channel stereo per AES3 standard via CS8420 Digital
Audio Transceiver with 24-bit resolution. Software selection of stereo,
mono from left, mono from right or mono from sum. Automatically
accepts sample rates between 24 kHz and 96 kHz.
Connector:
EMI-suppressed RJ-45 female pinned according to StudioHub+
®
standards. Transformer isolated, balanced, and floating according to AES3
standard.
Digital Audio Output: Stereo per AES3 standard. Digital Output sample rate software
selectable for internal 48kHz, synchronize to AES input, or synchronize to
auxiliary AES sync input (per AES-11 / DARS).
Connector:
EMI-suppressed RJ-45 female according to StudioHub+
® standards.
Transformer isolated, balanced, and floating according to AES3 standard.
Digital Output Level: -22.0 to 0.0 dBFS peak, software adjustable in 0.1dB steps.
Digital Sync Input: Output sample rate can be synchronized to the signal present on the
AES/EBU input or to the AES3 signal applied to the Ext. Sync connector.
External Sync Range: Accepts 32kHz to 96 kHz for synchronization of the Digital Output
signal to an external reference. Automatically accepts sample rates
between 32kHz and 96kHz.
Connector:
EMI-suppressed RJ-45 female pinned according to StudioHub+
®
standards, Transformer isolated, balanced, and floating according to AES3
standard.
Remote Control:
10/100BaseT Ethernet: standard web-based protocol and additional
TCP/IP connections.
Direct
Serial:
RS-232
at
9,600, 19,200, or 57,600 baud (no handshaking);
Hayes command set compatible external modem.
Connectors:
RS-232 port - EMI-suppressed DB-9 female connector.
Ethernet - Industry standard EMI-suppressed RJ-45 connector.
GPI Interface:
Configuration: Four fully optoisolated inputs.
Software sensing of both 'go-high' and 'go-low' transitions.
Inputs are protected to 2000 V AC/DC.
Connector:
EMI suppressed DB-9 male.
Control:
User-programmable using built-in Trigger Script feature in included
OmniaONE Remote Control software. Virtually any parameter of the
OmniaONE may be programmed through this interface feature.
OmniaONE Multicast - Use and Operation Manual – Version 0.90
50