New Media Technology Omnia ONE Multicast - Manual (Page 47)

[Enabled] Enables remote control access.
[Disabled] Disables remote control access.
Enter Password
Sets the password for both the front panel and remote control access.
The default password is “omnia” (all lower case)
To change the password highlight Enter Password and click. The Name field will be
automatically highlighted with <none> displayed. Click and <none> will vanish and be replaced
by the editing cursor.
Rotating the jog wheel clockwise will scroll through the capital letters of the English alphabet
first. Rotating it counter-clockwise will scroll through the numeric characters first, and then
through the lower case English alphabet. In-between is a blank space with an underscore character.
Once the desired character is found, click to accept that character.
Click again to display the editing cursor and add the next character the same way.
When you are finished and the new password is complete, do not click again to display the editing
cursor. Instead, rotate the jog wheel to highlight the Save button and click to save the password.
If you wish to cancel without saving the new password, rotate the jog wheel to highlight Cancel,
click to accept and the operation will be cancelled. The existing password will be retained.
<-Exit
Click on this option to return to the Administrative submenu.
<-Exit
Click on this option to return to the Main Menu.
Lock Front Panel
This is a feature that enables you to lock the front panel in order to prevent inadvertent or unauthorized tampering
with control settings and processing parameters. Access via user password is the only way to access the front panel
menus when it has been locked via a user-assigned password.
To lock the front panel, highlight Lock Front Panel and click.
A warning message will be displayed: “Locking front panel requires password to regain access!”
Rotate the jog wheel and click on “OK” to lock the front panel or “Cancel” to return to the Main Menu without
locking the front panel.
The factory default password is “omnia” (all lower case).
Changing the password is done using the Enter Password option in the Security section above.
OmniaONE Multicast - Use and Operation Manual – Version 0.90
47