NetComm IG6000 - Manual (Page 18)

Industrial Modem User Guide
YML391­3A 18
\J0 n Fallback to direct mode disabled
\J1 Fallback to direct mode enabled
\Kn Received Break control (default \K5)
\N0 Constant speed mode
\N1 Variable speed mode
\N2 MNP reliable mode
\N3 n V.42/MNP auto­reliable mode
\N4 V.42 reliable mode
\N5 V.42 auto­reliable mode
\N6 V.42/MNP reliable mode, fallback to MNP reliable mode
\N7 MNP auto­reliable mode
\Q0 Flow control disabled
\Q1 XON/XOFF flow control from modem and computer
\Q2 CTS flow control
\Q3 CTS­RTS flow control (same as &K3)
\Q4 Modem­only XON/XOFF flow control
\Q5 CTS flow control (CTS low until connection)
\Q6 CTS­RTS flow control ­ CTS low until connect
\S Display active configuration with detailed description
\Tn Set inactivity timer to n seconds (Default \T0)
\V0 n Disable reliable response codes
\V1 Enable reliable response codes
\V8 Extended response codes
\V9 Extended response codes with diagnostic information
\X0 n XON/XOFF pass through disabled
\X1 XON/XOFF pass through enabled
*C0 n Enable V.34
*C1 Disable V.34 use V.FC
*Wttt...tt Specify welcome message text used by %W1(ttt...tt = text use | for new line)
Modulation Setting
+MS? Report selected options
+MS=? Report list of supported options
+MS= <mod>,<automode>,<min_rate>,<max_rate><E>
<mod> see table
<automode> =0 (automode disabled, fixed modulation)
<automode> =1 (automode enabled, auto select speed/mod)
<min_rate> =lowest rate for modem connection
<max_rate> =highest rate for modem connection
<mod> Modulation Possible Rates (bps)
0 V.21 300
1 V.22 1200
2 V.22bis 2400 or 1200
3 V.23 1200
9 V.32 9600 or 4800
10 V.32bis 14400, 12000, 9600, 7200,or 4800
11 n V.34 33,600, 31,200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000,
9600, 7200, 4800, or 2400
64 Bell 103 300
69 Bell 212 1200