NetComm IG6000 - Manual (Page 19)

Industrial Modem User Guide
YML391­3A 19
Distinctive Ring
The Industrial Modem is able to discriminate between three different types of rings. This is useful if you purchase
the Telstra Duet service. With Telstra Duet, two phone numbers are shared for one telephone line. One number
can be used for Voice and the other number can be used for your Modem. To enable the modem to answer only
when your modem number is dialled, issue the command: AT­SDR=4 S0=2&W.
AT­SDR=n,x where n=0 to 7, default=0,
x=0 Disable Distinctive Ring response suffix;
x=1 Enable Distinctive Ring response suffix (default)
AT­SDR=0 Any ring detected and reported as "RING"
AT­SDR=1,1 Single ring detected and reported as "RING1"
AT­SDR=1,0 Single ring detected and reported as "RING"
AT­SDR=2,1 Double ring detected and reported as "RING2"
AT­SDR=2,0 Double ring detected and reported as "RING"
AT­SDR=3,1 Single and double ring detected and reported as "RING1"or"RING2"
AT­SDR=3,0 Single and double ring detected and reported as "RING"
AT­SDR=4,1 Triple ring detected and reported as "RING3"
AT­SDR=4,0 Triple ring detected and reported as "RING"
AT­SDR=5,1 Single and triple ring detected and reported as "RING1"or"RING3"
AT­SDR=5,0 Single and triple ring detected and reported as "RING"
AT­SDR=6,1 Double and triple ring detected and reported as "RING2"or"RING3"
AT­SDR=6,0 Double and triple ring detected and reported as "RING"
AT­SDR=7 Any ring detected and reported as "RING1"or "RING2"or"RING3"
+ Use AT­SDR=4 for Telstra's Duet service. Do not set Auto Answer below 2 when Distinctive Ring is
enabled.