Nortel Networks NN42030-300 User Manual
Page 25
Software installation
25
3
Locate the MCG 3100 software on the CD and enter the
following command:
appinstall
The installation script prompts you for the root password.
4
Enter the root password.
The following prompt appears:
Do you want to check the media [Y][N]?
5
To verify the media, enter Y (Yes).
For a new installation, the following prompt appears:
Installation stage Nortel MCG 3100 Mobile Gateway
Installation 1.
MCG 3100 5.00.20
Please select the supported configuration # to
install.
For a software reinstallation, you receive a prompt to remove any
previous installations.
6
To start a new installation, enter 1 and proceed to
.
OR
To start a software reinstallation, select Y (Yes) to confirm the
deletion, and proceed to
.
7
If you receive a prompt to perform a reinstall (1) or an upgrade
(2), enter 1 for a reinstall.
The application RPM files are installed in the /opt/mobilitybase
directory.
8
Read the Nortel software license agreement.
NORTEL SOFTWARE LICENSE - IMPORTANT NOTICE:
Carefully read this license agreement ("License")
BEFORE (a) downloading this software ("Software"),
(b) installing, using or accessing the software
provided (also "Software"), or (c) installing or
using the hardware unit provided with pre-enabled
software (also "Software") or using or accessing
such Software.
...
...
...
Do you agree to the above license terms?
[yes or no]
9
To agree to the license agreement, enter
YES
The software installation proceeds.
Nortel Mobile Communications Gateway 3100
installation in progress
...
...
Nortel Mobile Communication 3100 Series Portfolio
Nortel Mobile Communication Gateway 3100 Installation and Upgrades
NN42030-300
02.03
Standard
9 May 2008
Copyright © 2007, 2008 Nortel Networks
.