Nortel Networks NN42030-300 - Manual (Page 48)

48 System software maintenance
mobilitybase-2.1-75.src.rpm
Size :
72043134 License: Commercial Signature :
(none)
Summary :
Mobility Gateway Base distribution
package
Description :
facility for the configuration of the platform for
the mobility gw
The server completes the installation.
13 Enter
sudo /opt/mobilitybase-2.1-XX/postpatch.sh
where
XX is the load number being installed.
The server completes the installation, which ends with the
message
Post patch complete .
14 To check the SU installation, enter pstat
The server responds with information about the SU status. For
example,
In system patches:1
Patch handle 0*
Filename /var/opt/nortel/patch/mobilitybase-2.1.
75.el4
Patch release version:
5.00.38
Reference number: ISS1:1OF1
Patch is in-service
In-service date:
14/02/08 15:15:46
Patch category: GEN
Patch special instructions: no
Patch member type: RPM
Patch members: mobilitybase-2.1-75.i386.rpm
15 Verify that the version of the SU displays in the server response.
--End--
If you need to remove an SU, use the following procedure.
Procedure 14
Removing an SU
Step Action
1 Log on to the MCG 3100 as nortel.
For more information, see “Admin shell access” (page 50) .
2 To list the current patches and SUs in service, enter pstat
Nortel Mobile Communication 3100 Series Portfolio
Nortel Mobile Communication Gateway 3100 Installation and Upgrades
NN42030-300 02.03 Standard
9 May 2008
Copyright © 2007, 2008 Nortel Networks
.