Nortel Networks NN42030-300 - Manual (Page 49)

System software uninstallation 49
The server responds with information about the SU status. For
example,
In system patches:1
Patch handle 0*
Filename /var/opt/nortel/patch/mobilitybase-2.1.
75.el4
Patch release version:
5.00.38
Reference number: ISS1:1OF1
Patch is in-service
In-service date:
14/02/08 15:15:46
Patch category: GEN
Patch special instructions: no
Patch member type: RPM
Patch members: mobilitybase-2.1-75.i386.rpm
3 To take a patch or SU out of service, enter poos 0
The server responds
Patch handle: 0
The application mobilitybase should be stopped before putting
out of service this Service Update
Do you want to continue? (Y/N) [N]?
4 Enter y
The RPM patch removal completes.
5 To complete the removal, enter
sudo /opt/mobilitybase-2.1-XX/postunpatch.sh
where
XX is the load number being removed.
The server continues the removal, which ends with the message
Pre uninstall phase done.
Post uninstall phase done.
Updating iptables rules:
[ OK ] .
6 To verify that the SU was removed correctly, enter
swVersionShow
The server responds with the version. For example,
Configuration installed: MCG3100
Configuration version: 5.00.20
mobilitybase 2.1-48
nortel-cs1000-linuxbase 5.00.38
--End--
System software uninstallation
You uninstall the Nortel Mobile Communication Gateway 3100
(MCG 3100) system software from the command line.
Nortel Mobile Communication 3100 Series Portfolio
Nortel Mobile Communication Gateway 3100 Installation and Upgrades
NN42030-300 02.03 Standard
9 May 2008
Copyright © 2007, 2008 Nortel Networks
.