National Instruments VXI/VME 600 - Manual (Page 12)

© National Instruments Corporation 1-1 VXI/VMEpc 600 Series for Windows 95/NT
1
Introduction
This chapter describes the VXI/VMEpc 600 Series of embedded computers
along with the NI-VXI/VISA software, lists what you need to get started,
lists optional software, and gives an overview of the directory structure on
your hard drive.
How to Use This Manual
The following flowchart shows where to turn in this manual for more
details on configuring and using the hardware and software.
What You Need to Get Started
❑
VXI/VMEpc-650 embedded controller
❑
VXIbus or VMEbus mainframe
❑
Keyboard (and included adapter cable)
❑
Mouse
Yes No
Chapter 3 Develop Your Application
Using Hardware
Defaults?
Gather What You Need
to Get Started
Chapter 1
Install Hardware, Verify System,
Run T&M Explorer to Configure
All Devices in System
Refer to Your
VXI/VMEpc 600
Series User Manual
Chapter 2