National Instruments VXI/VME 600 - Manual (Page 59)

Index
© National Instruments Corporation I-3 VXI/VMEpc 600 Series for Windows 95/NT
NI-488.2 software kit, 1-3
NI-VXI/VISA software
common questions, B-1 to B-7
determining version of
NI-VXI/VISA software, B-4
differences between old and new
utilities, B-1 to B-2
handling VME devices, B-3
hardware questions, B-5 to B-7
Resman, B-3
startup Resman operation, B-4
VISAconf, B-2 to B-3
VXIedit, B-2 to B-3
VXIinit, B-2
library of NI-VISA routines, 1-3
pre-installed on VXI/VMEpc 600 Series,
1-4, 2-3
programming considerations, 3-4 to 3-7
compiler symbols for NI-VXI,
3-6 to 3-7
example programs, 3-4 to 3-5
overview, 3-4
user manuals (note), 3-4
VME support, 3-5
reinstalling, C-1 to C-3
completing, C-3
installation procedure, C-2 to C-3
preparing for, C-1
O
os directory, 1-5
P
power cycling, running Resman after
(note), 3-1
programming. See developing applications.
Q
questions about NI-VXI/VISA software,
B-1 to B-7
determining version of NI-VXI/VISA
software, B-4
differences between old and new utilities,
B-1 to B-2
handling VME devices, B-3
hardware questions, B-4 to B-7
Resman, B-3
startup Resman operation, B-4
VISAconf, B-2 to B-3
VXIedit, B-2 to B-3
VXIinit, B-2
R
reinstalling NI-VXI/VISA software,
C-1 to C-3
completing, C-3
installation procedure, C-2 to C-3
preparing for, C-1
requirements for getting started, 1-1 to 1-2
Resman utility
purpose and use, 3-1 to 3-2, B-3
reconfiguration after power cycling
(note), 3-1
startup Resource Manager operations,
B-4
testing the system, B-5
using with T&M Explorer, 3-2
when to run, 3-1, B-3
S
SCSI drives, B-7
setting up VXI/VME system. See
configuration; installation.
System Controller, installing VXI/VMEpc 600
Series in alternative slot, B-6 to B-7