National Instruments VXI/VME 600 - Manual (Page 31)

Appendix A Default Settings
VXI/VMEpc 600 Series for Windows 95/NT A-4 © National Instruments Corporation
Table A-6. VXI/VME-MXI-2 T&M Explorer VXI/VME Bus Tab
Default Settings
Editor Field Default Setting
Bus timeout value 125
µ
s
Slot 0 configuration Auto-detect
Auto retry Disabled
Transfer limit 256
Arbiter type Priority
Fair requester Enabled
Arbiter timeout Enabled
Request level 3
Table A-7. VXI/VME-MXI-2 T&M Explorer MXI-2 Bus Tab Default Settings
Editor Field Default Setting
System controller Auto-detect
Bus timeout value 1 ms
MXI-2 auto retry Disabled
MXI transfer limit Unlimited
MXI fair requester Disabled
Perform parity checking Enabled
MXI-2 CLK10 signal direction Switch determines signal
direction (VXI-MXI-2 only)