Napco Security Technologies GEM-DXRP3 - Manual (Page 18)

18
K E Y P AD F U N C T I O N S
15. Activate Telephone Test? (Telephone Test programmed? ‰YES ‰NO). Sends
a communicator test to the central station. A communication failure will be
indicated at the keypad by a system trouble “E03-00” display. Repeat the test to
attempt to correct a communication failure, as any successful communication will
clear this display.
16.
Delay Arming 1-4 hours. (Not for UL-listed systems). Your system may be set
to arm automatically after a delay period of 1 to 4 hours.
To Delay Arm the system:
• With Function 16 in the window, enter the desired Delay Arming time in hours
( 1 , 2 , 3 ,or 4 ), followed by
D
.
At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second
warning and the keypad will begin a 15-minute arming countdown with the sounder
pulsing. The sounder may be silenced at this time by pressing
C , but it will turn
back on with a steady warning tone 1 minute prior to arming, at which time the
building must be exited.
The same steps can be used to delay a scheduled Auto Arming, if your system has
been programmed as such.
15
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME
16
INTERIOR BYPASS FIRE/TBL SYS TBL CHIME