Napco Security Technologies GEM-DXRP3 - Manual (Page 30)

30
Trouble
Indication
System Trouble
Condition
Action
E19-00 User Program Memory Error Call installing company for service.
E-20-00 Dealer Program Memory Error Call installing company for service.
E-21-00 System Shutdown Call installing company for service.
E-22-NN Sensor Watch Activity Failure A Motion Sensor on the zone indicated has failed the programmed Sensor Watch activity test.
Insure that the sensor is able to detect activity in the area; clear any obstacles which may be
blocking the sensor from detecting activity. Press
C to clear the display, and then use the
Function Menu to Reset Sensor Watch Failure (see page 17). If you cannot correct the
problem yourself, call installing company for service.
E-23-00 Burglary Bus Failure Call installing company for service.
E-24 Service Message The system is in need of a preventive maintenance service call.
E-27-00 Printer Failure Call installing company for service.
E-39-00 Receiver Capacity Error Call installing company for service.
E-40-NN RF Self Test Failure A wireless motion sensor on the zone indicated has failed its automatic self test routine.
Call installing company for service.
E-41-NN Fire Trouble A problem has been detected on the Fire zone indicated. Call for service. (GEM-P1632 and
GEM-P816 panels only).
E-51 Bell/Siren Trouble There is a problem with the Bell or Siren. Call installing company for service.
E-58-00 Telemetry Trouble Call installing company for service.
E-59-00 Telemetry Failure Call installing company for service.
E-66-00 "Clean Me" Smoke Detector Dirty Clean detector or call installing company for service.
E-99-00 Keypad Panic Shorted too Long Call installing company for service.
S Y S T E M T R O U B L E E R R O R C O D E S