Napco Security Technologies GEM-DXRP3 User Manual

Page 31

Advertising
background image

31

T R O U B L E S H O O T I N G

What do I do if...

For more info...

I try to arm my system but the keypad just displays a P and beeps at me.

If the green STATUS light is off, a zone is open. Refer to the Pull Up Zone Directory and find
and secure the open window or door.

See Page 6

I try to arm my system but the keypad displays a P and beeps at me. The SYS TBL light is lit
and numbers start scrolling in the display.

A System Trouble has been detected. Note the scrolling error codes, which represent the
trouble. Press

C

and you will now be able arm to the system , but the trouble must be

fixed as soon as possible.

See Page 7 & 27

The Fire Alarm is sounding and I don’t know how to turn it off.

If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire
Department from an outside telephone. If there is no evidence of a fire, enter your code and
press

J

to silence the alarm. Note the number of the Zone flashing in the window. Check

the smoke detector(s). If a smoke detector tripped, its red alarm indicator light will be on.
Press

C

to silence the keypad sounder.

See Page 11

Advertising