NETGEAR ADSL Firewall Router DG834 User Manual
Page 136
Reference Manual for the ADSL Firewall Router DG834
7-46
Virtual Private Networking (Advanced Feature)
202-10005-05, June 2005
5.
Click Apply. The Get VPN Policies web page is displayed.
Figure 7-45: VPN Policies Screen
6.
Repeat for the DG834 on LAN B and pay special attention to use the following network
settings as appropriate.
•
General, Remote Address Data (e.g., 14.15.16.17)
•
Remote LAN, Start IP Address
— IP Address (e.g, 192.168.0.1)
— Subnet Mask (e.g., 255.255.255.0)
— Preshared Key (e.g., 12345678)
7.
Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
a.
Open the DG834 management interface and click on VPN Status to display the VPN
Status/Log screen (
Note:
The VPN Status screen is only one of three ways to active a VPN tunnel. See