NETGEAR ADSL Firewall Router DG834 User Manual
Page 219
Reference Manual for the ADSL Firewall Router DG834
NETGEAR VPN Configuration
E-19
202-10005-05, June 2005
Figure E-16: Security Policy Editor Connection settings
c.
Select Secure in the Connection Security check box.
d.
Select IP Subnet in the ID Type menu.
e.
In this example, type 192.168.0.1 in the Subnet field as the network address of the DG834.
f.
Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the DG834.
g.
Select All in the Protocol menu to allow all traffic through the VPN tunnel.
h.
Select the Connect using Secure Gateway Tunnel check box.
i.
Select Domain Name in the ID Type menu below the check box and enter
fromDG834G.com (in this example).
j.
Select Gateway Hostname and enter ntgr.dyndns.org (in this example).
k.
The resulting Connection Settings are shown in
.
3.
Configure the Security Policy in the DG834 ADSL Firewall Router software.
a.
In the Network Security Policy list, expand the new connection by double clicking its
name or clicking on the “+” symbol. My Identity and Security Policy subheadings
appear below the connection name.
ntgr