NETGEAR ADSL Firewall Router DG834 User Manual
Page 212
Reference Manual for the ADSL Firewall Router DG834
E-12
NETGEAR VPN Configuration
202-10005-05, June 2005
c.
Click Show Status. The resulting screen should show Update OK: good (see
Figure E-10: Status Screen
5.
Configure the DG834 as in the Gateway-to-Gateway procedures using the VPN Wizard (see
“How to Set Up a Gateway-to-Gateway VPN Configuration“ on page 7-20
), being certain to
use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows.
•
DG834
LAN IP = 10.5.6.1
LAN Subnet Mask = 255.255.255.0
•
FVL328
LAN IP = 172.23.9.1
LAN Subnet Mask = 255.255.255.0
a.
In Step 1, enter toFVL328 for the Connection Name.
b.
In Step 2, enter fvl328.dyndns.org for the remote WAN's IP address.
a.
In Step 3, enter the following:
•
IP Address = 172.23.9.1
•
Subnet Mask = 255.255.255.0