Nortel Networks 2210 - Manual (Page 100)

100
Desktop Charger
Use the Desktop Charger
To charge the WLAN Handset 2210:
1. Press the Power Off/End Call key to
terminate any calls.
The handset can be off or in standby
mode during charging.
2. Place the handset, face forward, into the
Desktop Charger.
The red indicator light turns on.
Note: The indicator light does not come
on when the charger slot is empty, when
the handset is not inserted properly, or
when the charger has no power.
3. Charge the battery pack.
If the handset is in standby mode, it
displays its extension number and
Charging…. It is fully operational and
can receive calls. If the handset is off,
only Charging… displays and the
handset cannot receive calls.
Note: It is normal for the battery pack to
become warm when charging.
4. When the handset is fully charged,
Charge Complete displays. Remove
the handset from the charger.
Note: The red indicator light remains on
until the handset is removed from the
charger.