Nortel Networks 2210 - Manual (Page 70)

70
Incoming calls
4. Dial the DN of the handset that is
ringing (in your call pickup group).
If the pickup DN or group number is
invalid, press the
Power Off/End Call
key.
Use Call Waiting
The Call Waiting feature alerts you to an incoming call by producing a tone. It also
puts the current call on hold, while you answer the new call.
To answer an incoming call while on
another call:
+
1. When the incoming call tone sounds,
press the
Function key and the number
2 key to put the current call on hold.
Note: If Automatic Hold is enabled, it
is not necessary to put the current call on
hold. Begin with step 2.
2. Press the Line key to access the Feature
Keys menu.
3. Press the number key corresponding to
the
Call Waiting feature.
To return to the first telephone call:
1. Choose one of the following:
+
or
• Press the Function key and the
number 2 key to put the second call
on hold.
• Press Power Off/End Call to end
the second call, then press the
Power On/Start Call to enter the
active (idle) state.
CallWait