Nortel Networks 2210 - Manual (Page 83)

83
Other call features
Other call features
Use Call Page Connect to make an announcement
Use the Call Page Connect feature to make an announcement over a paging system.
Note: A Page key on an attendant console overrides and disconnects the telephones.
The telephones must re-access the Page trunk.
To connect to Call Page:
1. Go off-hook.
2. Dial the Page Trunk Access Code to
complete the connection to the page
system.
3. Make your announcement.
To disconnect Call Page:
Press the Power Off/End Call key .
Use Centrex/Exchange Switchhook Flash
Use the Centrex/Exchange Switchhook Flash feature during an established call to use
a Centrex service, such as Call Transfer or Three-Way Calling.
To use Centrex/Exchange Line
Switchhook Flash:
1. While in a call, press the Line key to
access the Feature Keys menu.
2. Press the number corresponding to the
Centrex Switchhook Flash feature.
A special dial tone sounds.
3. Dial the codes for your custom Centrex
feature.
4. Press the Power Off/End Call key to
end the call.
CentrexSHF