Nortel Networks 2210 - Manual (Page 29)

29
Basic handset operation
Make a headset call
To make a call using a headset:
1. Connect the headset to the headset jack.
2. Follow the steps in “Make a call” on
page 28 to make your call.
Answer a call
The handset rings or vibrates to alert you to an incoming call. Additionally, a line
number on the display flashes, and the display shows information about the call, such
as the caller’s name and extension.
To answer a call:
Press the Power On/Start Call key.
To answer a call on another line: Note: While on a call, you hear a soft
beep to indicate another incoming call.
1. If on a call, press the Function key to
access the list of functions.
2. Press the number 2 key to place the
current call on hold.
3. Press the Line key to access the Line
(DN) feature keys.
4. Press the number key corresponding to
the flashing line number.
To answer a headset call:
When a headset is plugged into the
handset, press any key other than Power
On/Start Call, Power Off/End Call, soft
keys or the side buttons.