NDC comm NWH650 - Manual (Page 32)

26 InstantWave High Rate 11Mbps Access Point
Figure 22. Network Management System-2
2. Click the AP main menu item to open its sub-menu and then click Create New
AP (Figure 23).
Figure 23. Network Management System-3
Input the AP’s IP address and its community string (this string will be used for
SNMP access control). When the information has been entered, the OK button will
become active. Click OK. Repeat the process to add more APs. To delete an AP
icon from the window, first select it and then press the Delete key.
Connecting to an AP
Once a Host Table has been created, a connection can be made by double-clicking
an AP’s icon in the Host Table. Alternatively, click AP on the main menu and then
click Connect AP.
In the Connect AP dialog box, click on the down arrow of the AP entry field to
open the dropdown AP list. Select an AP and complete the selection by clicking
OK. If the connection is successful the current connected AP’s IP address will
appear on the title bar.
AP Properties
After connecting, right-clicking on a connected AP’s icon will open a menu. Click
Properties to open the AP Properties screen (Figure 24).