NDC comm NWH650 - Manual (Page 41)

InstantWave High Rate 11Mbps Access Point 35
The Wireless card groups all the user configurable wireless Access Point (AP)
functions. Here you may make settings as follows:
AP Alias
Name
Assigns the AP a unique name
Domain
Name (SSID)
This is more commonly called the Domain Name but is
defined in the IEEE 802.11 Wireless Standard as SSID.
Stations and APs in the same group must use the same
Domain Name
Secure SSID • Blocks a connection request without the exact SSID
• Hides the SSID in outgoing beacon frames. A site
survey tool will not find the AP
Transmission
Rate
The transmission rate at which the data packets are
transmitted by the AP. You can set this to Auto select 1 or
2Mbps, Fixed 1Mbps, Fixed 2Mbps, Fixed 5.5Mbps, Fixed
11Mbps or Full Auto (1 to 11Mbps)
Basic Rates
This value determines the basic rates used and reported for
this BSS by the AP. The highest rate specified will be the
rate that the AP will use when transmitting
broadcast/multicast and management frames.
Available options are: 1 and 2Mbps and All (1, 2, 5.5, and
11Mbps)
Channel
Number
Refer to the Appendix, page 52, for a list of the channels
supported in each regulatory domain
Regulatory
Domain
Identifies the country where the AP is used (see the
Appendix, page 52). Each Regulatory Domain has defined
the channel numbers and transmission power available
After making any changes, click OK and then click the Reset AP menu item.