NDC comm NWH650 - Manual (Page 44)

38 InstantWave High Rate 11Mbps Access Point
Figure 34. AP Trap Server Program
When the AP is powered on, or an Ethernet port becomes active, an event log will
be generated indicating the time, the MAC ID of the reporting AP, and the activity.
You may save, open, and delete log files from the File menu.
In the Program menu, select Auto Startup After Reboot to activate the Trap Server
when the system is rebooted, or Pause Program to pause the Trap Server.
Load Factory Configuration
Clicking Load Factory Configuration opens a dialog box. Click OK to
return the AP to the default settings. The default IP setting is 192.168.1.1
and the default subnet mask is 255.255.255.0. Click the Reset AP menu
item to make the changes effective.
Upgrade AP Firmware
The Access Point’s (AP’s) embedded software is burned into the flash ROM.
However, an updated AP code can be installed over your LAN via the APMS
program. Click on Upgrade AP Firmware. The Upgrade AP Firmware dialog
box will open (Figure 35).
Use the Browse button to choose the file to be uploaded to the AP, or type the file
name and path in the Local File field.