Machine component identification – North Star 27500 User Manual
Page 3
2
Ma ximum Output
27500 Watts (W)
Continuous Output
24000 W
Voltage
120 / 240 Volt (V)
Phase
Single phase (4-wire)
Frequency
59.0-63.0 Hertz (H z)
Power Factor
1.0
Minimum PTO HP
48 HP at 540 RPM
Input Shaft
1 3/8” Diameter, 6 spline
120V Receptacle
(2) 20 Amp (A) duplex (NEMA 5-20R)
30A Twistlock (NEMA L5-30R)
120/240V Receptacle
60A Straight blade (NEMA 14-60R)
100A Pin and sleeve (4100R12W)
Circuit Breaker
(2) 20A thermal, push to reset style
30A thermal, push to reset style
60A thermal magnetic
100A thermal magnetic
Gear Box
Gear Ratio
1:7
Gear Oil
SAE 80W-90
Oil Capacity
.53 Qt. (.5 L)
Dimensions
Length
36.95” (93.9 cm)
Width
16.85” (42.8 cm)
Height
20.79” (52.8 cm)
Gross Weight
425 lb. (193.2 kg)
ANSI SAFETY DEFINITIONS
DANGER
indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury. This signal word is to be limited to the most
extreme situations.
WARNING
indicates a potentially hazardous situation which, if not avoided, could
result in a death or serious injury.
CAUTION
indicates a potentially hazardous situation, which if not avoided, may
result in minor or moderate injury. It may also be used to alert against unsafe
practices.
MACHINE COMPONENT IDENTIFICATION