Napco Security Technologies EXPRESS XP-600 - Manual (Page 4)

ARMED
READY
SYSTEM ü
FIRE
AC
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
4
Keypad Controls and Indicators
Ready Light will light when all zones are secure
and system is ready to be Armed.
AC Light will light to indicate that AC Power
is present.
Fire Alarm Light will flash and the Keypad
sounder will beep when system is in a Fire Alarm
Condition (See Silencing a fire Alarm, Page 8)
Zone Lights (1 through 6) will light to indicate
that the corresponding Zone is open, and will
flash to indicate a zone in alarm.
Armed Light will light when system is Armed,
and will flash when system is in Alarm
#
Key - used to reset Fire Zone, clear miss-
entered codes, reset Alarm Memory, etc..
ь ь System Light will light and the Keypad
sounder will pulse to indicate that a system trou-
ble is present.(See System Troubles, Page12)
ь ь Key Press to display any present
System troubles. Only available when
ь
ь System Light is lit.
(See System troubles, Page 12)
Emergency Keys Press
simultaneously to signal
an emergency condition.
Press
F
+
F
for Fire,
A
+
A
for Auxiliary or
P
+
P
for Police Emer-
gency. (Programmable)
Bypass Key Used to
bypass zones. Press
Bypass and the corre-
sponding zone number,
and then Arm system.
*
Key Used to enable
special functions and op-
tions. Press
*
and then
the corresponding Spe-
cial Function number
Option (See Special
Functions, Page 11)
Numerical Keys 1-9, 0. Used to enter
User Codes, Zone numbers, etc.
NAPCO
Oi218a.pub
page 4 Thursday, December 18, 1997 18:29